簡介：

SP-72氟素脫模噴劑是一種無硅干膜噴劑，令脫膜操作快捷、有效及清潔。無論模具如何復雜，紋路如何細致，仍能可靠地復制模型輪廓。本產品適用于所有塑料和橡膠模具，包括注塑、壓縮及吹塑成型工序。

本產品能均勻地滲透到復雜模具的各個部分，給予完全而清潔的脫模作用。其干性薄膜不會影響制成品輪廓或妨礙精密接合。施涂薄膜粘附能力佳，不會污染或轉移到制成品上，安全可靠，不怕產生瑕疵，亦不會對隨后的拋光工序構成不良影響。

Description:

SP-72?PTFE MOULD RELEASE AGENT is designed to give fast, efficient and clean release with faithful reproduction of the mould profile however complex the mould or minute the detail. Suitable for use on all plastic and rubber mould tools including injection, compression and blow mouldings.?

Penetrates and spreads to all parts of the most intricate moulds to give full, clean release whilst the dry film will not affect profiles or interfere with precision fits. Applied film has excellent adhesion, is non-staining, will not transfer to product and can be safely used without fear of blemish or any adverse effect on subsequent finishing operations.?

?

注意事項：

使用前先搖勻，罐身垂直，噴嘴距離模具約20厘米處噴射即可，涂布一次已足夠產生功效。壓力容器避免陽光直接照射，存放在溫度低於50°C的地方。

切勿將容器戳穿或焚燒。

不應噴向火焰或白熾的金屬表面。

易燃物品。?

Precautions:

*Shake well, hold upright and spray from a distance of approximately?20cm. One?pass usually?provides?sufficient?coating. Pressurised container, protect from sunlight, store at temperature below 50℃

*Do not puncture or incinerate

*Do not spray on to naked flame

*flammable

??

特性及優點：

*塑料和橡膠成型部件有效的脫膜?

*薄膜-不會影響制成品輪廓或妨礙精密接合?

*不會影響隨后的拋光工序?

*不含硅。

Features & Benefits:

*Effective?release?of?plastics?and?rubber?moulded parts.?

*Thin film?-?will?not?affect?profiles?or?interfere?with precision fits.?

*Will not affect subsequent finishing operations?

*Silicone free.?